Kotest Integration with Mergify
Report your test results from Kotest to Mergify
This guide shows how to upload the JUnit reports of your Kotest specs, run with Gradle, to Test Engine from your CI workflow.
Generate a JUnit report with Kotest
Section titled Generate a JUnit report with KotestKotest runs on the JUnit Platform, and Gradle’s test task writes a JUnit
report for every spec class it runs. Enable the platform in your
build.gradle.kts, next to the Kotest runner:
dependencies { testImplementation("io.kotest:kotest-runner-junit5:6.2.6")}
tasks.test { useJUnitPlatform()}Then run your tests:
./gradlew test --continueGradle writes one report per spec class under build/test-results/test/, such
as build/test-results/test/TEST-com.example.CartSpec.xml. In a multi-project
build, each project writes its own, and --continue runs the tests of every
project even after one fails, so each report reaches the upload.
Update your CI workflow
Section titled Update your CI workflowGitHub Actions
Section titled GitHub ActionsRun the tests in a step with an id, and let the upload step decide the
job’s result:
- name: Run Kotest Specs id: tests continue-on-error: true run: ./gradlew test --continue- name: Mergify CI Upload if: (success() || failure()) && (!github.event.pull_request || github.event.pull_request.head.repo.full_name == github.repository) uses: mergifyio/gha-mergify-ci@v30 with: report_path: "**/build/test-results/test/*.xml" test_step_outcome: ${{ steps.tests.outcome }}Key Points:
-
if: (success() || failure()) && (!github.event.pull_request || github.event.pull_request.head.repo.full_name == github.repository): Runs the upload step even if tests fail, so Test Engine gets the full report, and skips it on pull requests from forks, which get no ID token. -
report_path: "**/build/test-results/test/*.xml": Points to where your JUnit file is located. Make sure it matches the path you set in your CI job. -
test_step_outcome: ${{ steps.tests.outcome }}: Passes the test runner step's outcome so Mergify can detect silent failures where the runner crashed but the JUnit report appears clean. Add anid(such astests) to your test runner step and update thesteps.<id>.outcomereference to match.
If you use a job matrix in your workflow (e.g., to test across multiple versions), every leg
reports the same job name, because GitHub Actions gives them all one GITHUB_JOB. Set
the job_name input so Test Engine can tell the reports apart:
jobs: example_matrix: strategy: matrix: version: [10, 12, 14]Your upload step should look like:
- name: Mergify CI Upload if: (success() || failure()) && (!github.event.pull_request || github.event.pull_request.head.repo.full_name == github.repository) uses: mergifyio/gha-mergify-ci@v30 with: job_name: example_matrix (${{ matrix.version }}) report_path: "**/build/test-results/test/*.xml" test_step_outcome: ${{ steps.tests.outcome }}To benefit from Test Engine quarantine, you need to add continue-on-error: true
in your GitHub Actions step that executes your tests and generates the JUnit file.
The step running the gha-mergify-ci action then decides whether the job passes or fails,
taking quarantined tests into account.
You should also pass test_step_outcome: ${{ steps.tests.outcome }} to the step that runs
mergifyio/gha-mergify-ci (where tests is the id of your test runner step) to detect
silent failures where the test runner crashed but the JUnit report appears clean. Without
this input, a crash that produces a partial or empty report could be mistakenly treated as a
success.
With continue-on-error: true, the job’s result comes from the upload step,
which pull requests from forks skip: add the step that fails the job when the
tests failed and nothing was uploaded, as shown in
pull requests from forks.
Let your CI reach Mergify Preview
Section titled Let your CI reach Mergify
Grant id-token: write to the job, or to the whole workflow. The job then trades its
GitHub-signed ID token for a Mergify token, and no MERGIFY_TOKEN is stored:
permissions: id-token: write # lets the job ask GitHub for an ID token contents: read # actions/checkout needs it
A permissions block sets every permission it does not list to none: list
the ones your other steps need too.
Mergify refuses the ID token until a trust policy of your organization matches the job. A
GitHub organization Owner or a CI Admin writes one under
Settings → Developer → OIDC on the
dashboard. OIDC Authentication
covers trust policies, pull requests from forks and refused exchanges. If your workflows store
MERGIFY_TOKEN today,
move them off it.
Use an application key instead
Section titled Use an application key instead
Other CIs authenticate with a ci
application key, and so do the GitHub Actions jobs OIDC
leaves out: runs for pull requests from forks when your organization sends them secrets, and jobs
that send scopes from the base branch (pull_request_target,
workflow_run, issue_comment). Store the key as the
MERGIFY_TOKEN repository secret and set it on the job:
env: MERGIFY_TOKEN: ${{ secrets.MERGIFY_TOKEN }}
A MERGIFY_TOKEN that is set wins over the ID token. For pull requests from forks,
set it on those runs only and drop the fork condition from the upload step, as
Jobs that keep a key shows. Store the key in
your
Dependabot secrets too, since runs for Dependabot pull requests read only those.
Buildkite
Section titled Buildkitesteps: - label: "Run tests" command: <your test command> plugins: - mergifyio/mergify-ci#v15: action: junit-process report_path: "**/build/test-results/test/*.xml"Key Points:
-
The plugin runs in the
post-commandhook, so it uploads results after your tests finish, even if they fail. -
report_path: "**/build/test-results/test/*.xml": Points to where your JUnit file is located. Make sure it matches the path you set in your test configuration. - Silent failure detection is automatic: the plugin reads the step's exit code to detect cases where the test runner crashed but the JUnit report appears clean.
If you use a build matrix in your pipeline, each variation reports its own step label as its job
name, so the variations are already distinct. Set the job_name plugin property when the
label is not the name you want Test Engine to file the reports under:
steps: - label: "Flaky detection ({{matrix}})" matrix: - "3.10" - "3.11" - "3.12" command: <your test command> plugins: - mergifyio/mergify-ci#v15: action: junit-process job_name: "Tests ({{matrix}})" report_path: "**/build/test-results/test/*.xml"When using the Buildkite plugin for Test Engine quarantine, the plugin automatically detects test failures using the step’s exit code. No extra configuration is needed.
The mergifyio/mergify-ci plugin runs in the post-command hook and reads
BUILDKITE_COMMAND_EXIT_STATUS to detect silent failures where the test runner
crashed but the JUnit report appears clean.
Any CI (Mergify CLI)
Section titled Any CI (Mergify CLI)Quote the pattern, so that mergify ci junit-process expands it rather than
the shell: without globstar, bash reads ** as * and misses the reports
at other depths.
Install the Mergify CLI in your pipeline and export
MERGIFY_TOKEN. Run
mergify ci junit-process after your tests:
set -o pipefailexit_code=0./gradlew test --continue || exit_code=$?mergify ci junit-process \ --test-exit-code "$exit_code" \ "**/build/test-results/test/*.xml"Key Points:
-
MERGIFY_TOKEN: Export this environment variable with your Mergify application key sojunit-processcan authenticate to the API. On GitHub Actions, a job grantedid-token: writeneeds none: it trades its ID token for a Mergify token, as OIDC Authentication explains. -
|| exit_code=$?: CI shells run with-e, so a failing test command on its own line would end the script before the upload. This form keeps going and records the code. The script needs bash forset -o pipefail: on Jenkins, whoseshsteps often rundash, start it with#!/bin/bash. -
--test-exit-code "$exit_code": Passes the test runner's exit code so Mergify can detect silent failures where the runner crashed but the JUnit report appears clean. -
junit-processexits last, so its status becomes the step's. Quarantine depends on that: it exits0when every failure it found is quarantined, and1when one is not. Re-exiting with the test runner's own code would fail the step whatever quarantine decided. -
The branch quarantine is evaluated against is detected from your CI provider: the pull
request's base branch, falling back to the branch built. Pass
--tests-target-branch <branch>to override it, or to name one where your provider reports neither — with no branch to look tests up on, quarantine is off for the run and every failure blocks.
Test names
Section titled Test namesTest Engine names each test by its spec class, then a dot and the name Kotest reports for it. What that name holds depends on your Kotest version.
Kotest 6 reports a test’s own name, prefixed by its kind, without the
containers around it: it("adds an item") inside describe("add()") of the
spec com.example.CartSpec is reported as com.example.CartSpec.It: adds an item.
Two tests of the same name in one spec, under different containers, get the
same name and share one history in Test Engine. Give each test a name that is
unique within its spec, for example it("add() adds an item").
Kotest 5 leaves out the containers too, and the prefix, unless you turn on
displayFullTestPath in a project configuration that Kotest finds at its
default location:
package io.kotest.provided
import io.kotest.core.config.AbstractProjectConfig
object ProjectConfig : AbstractProjectConfig() { override var displayFullTestPath: Boolean? = true}With it, the same test is reported as
com.example.CartSpec.add() adds an item. Kotest 6 ignores this setting in
JUnit reports.
Renaming a spec, a container or a test starts a new history for the tests it
holds. Tests disabled with xit are reported as skipped.
Verify and review in Test Engine
Section titled Verify and review in Test EngineAfter pushing these changes:
- Your CI workflow runs your Kotest specs.
- Gradle writes a report per spec class under
build/test-results/test/. - Mergify uploads the reports to Test Engine.
You can then review your test results, including any failures or flaky tests, directly in the Test Engine dashboard.
Troubleshooting tips
Section titled Troubleshooting tipsNo reports: check that the
testtask callsuseJUnitPlatform(). Without it, Gradle does not find Kotest’s specs and writes no report for them.- The CLI provides information about the upload. Check the logs in GitHub Actions.
- File paths: Double-check that the output file matches the path used in
report_path. Authentication: The upload step’s log says why Mergify refused the job’s ID token, as OIDC troubleshooting details. A job that sets
MERGIFY_TOKENuses that key instead: check that it is valid and granted CI Reporting, or move the job off it.- Workflow conditions: If your step is not running, confirm the if condition is actually triggered in your job.
Was this page helpful?
Thanks for your feedback!